User's Manual

Chapter 4 Installing the Internal SATA-to-USB Tape Drive

Completing the Internal SATA-to-USB Tape Drive Installation

DLT-V4 Product Manual 31

Figure 17 Securing the Internal

SATA Tape Drive in the

Installation Bay

Replace the cover on the server or workstation.

3 Connect the power cord to the server or workstation and any

peripheral devices that you detached earlier.

4 Power on any attached peripheral devices.

5 Power on the server or workstation and allow its operating system to

start.

Note: Some servers and workstations require mounting rails for

internal devices. Contact the server or workstation

manufacturer for information.