User's Manual

Chapter 3 Installing the Internal SATA Tape Drive

Installing the Internal SATA Tape Drive

DLT-V4 Product Manual 21

Secure the internal SATA tape drive with the supplied mounting

screws in the installation bay, either on the sides or bottom of the tape

drive sled, as appropriate for the server or workstation chassis. See

figure 11

for an example of where you might find these screws.

Figure 11 Securing the Internal

SATA Tape Drive in the

Installation Bay

Replace the cover on the server or workstation.

10 Connect the power cord to the server or workstation and any

peripheral devices that you detached earlier.

11 Power on any attached peripheral devices.

12 Power on the server or workstation and allow its operating system to

start.

Note: Some servers and workstations require mounting rails for

internal devices. Contact the server or workstation

manufacturer for information.