User's Manual

Chapter 2 Installing the Internal SCSI Tape Drive

Installing the Internal SCSI Tape Drive

DLT-V4 Product Manual 14

Secure the internal SCSI tape drive with the necessary mounting

screws, either in the sides or bottom of the tape drive sled, as

appropriate for the server or workstation chassis. See figure 7

for an

example of where you might find these screws.

Figure 7 Securing the Internal

SCSI Tape Drive in the

Installation Bay

Replace the cover on the server or workstation.

12 Connect the power cord to the server or workstation and any

peripheral devices that you detached earlier.

13 Power on any attached peripheral devices.

14 Power on the server or workstation and allow its operating system to

start.

Note: Some servers and workstations require mounting rails for

internal devices. Contact the server or workstation

manufacturer for information.