User's Manual

Chapter 2 Installing the Internal SCSI Tape Drive
Installing the Internal SCSI Tape Drive
DLT-V4 Product Manual 11
3
Remove the cover from the server or workstation as described in the
server or workstation’s documentation (see figure 4
).
Figure 4 Removing the
Workstation Cover (example)
4
Locate an available 5¼-inch drive bay and remove the front cover
from the drive bay as described in the server or workstation’s
documentation (see figure 5
).
5 If necessary, install an LVD/SE host bus adapter in the server or
workstation. For more information on SCSI host adapter
requirements, see SCSI Bus and Cable Requirements
on page 4.