User's Manual

Chapter 2 Installing the Internal SCSI Tape Drive
Installing the Internal SCSI Tape Drive
DLT-V4 Product Manual 10
Figure 3 SCSI Cable with Built-
in Terminator
Installing the Internal SCSI Tape Drive 2
To install the tape drive, follow these steps:
1 Shut down the operating system and power off the server or
workstation.
2 Power off all peripheral devices, such as printers and other SCSI
devices.
Caution: Do not go to step 3 until you have completed steps 1
and 2. Failure to follow these instructions may result
in damage to the tape drive or other devices.
Terminator
SCSI cable
(supplied with
host adapter)