User's Manual

Chapter 2 Installing the Internal SCSI Tape Drive
Setting the SCSI ID
DLT-V4 Product Manual 7
Figure 1 Rear Panel
Connections for the Internal
SCSI Tape Drive
2
Use the supplied jumpers to select the desired SCSI ID as shown in
table 2
:
Table 2 Selecting the SCSI ID
SCSI ID 0 1 2 3
Jumper
Block
SCSI ID 4 5 (default) 6 7
Jumper
Block
SCSI ID 8 9 10 11
Jumper
Block
SCSI ID 12 13 14 15
Jumper
Block
Drive power connector
SCSI ID jumper block
68-pin high-density
SCSI connector