Specifications

30 35-70 Gbyte SPARCstorage DLT7000 Tape Drive Manual—February 1997
L
LEDs
blinking
all, 6, 8
density, 8
Density Override, 8
Tape In Use, 9
left front panel, 8
right front panel, 9
left front panel LEDs, 8
loading a tape cartridge, 13
O
Operate Handle LED, 9
operating system, determining, 1
P
patch, SunVTS, 17
physical specifications, 25
Q
quality specifications, 27
S
SCSI device identifier, See SCSI ID
SCSI ID
cable, 3
determining, 1
jumpers, 3
Select button, 8
specifications
electrical, 25
interface and performance, 26
physical, 25
quality, 27
tape cartridge, 27
timing, 26
st.conf file, 19
SunDiag, 17
SunVTS, 17
T
tape cartridge
capacity, 10
cleaning, 17
density, 14
handling and storage, 12
loading, 13
specifications, 27
types, 10
unloading, 16
write-protect switch, 11
tape drive
back, 2
connectors, 2, 3
front panel, 7
installation, 1
operation, 7
Tape In Use LED, 9
target address, See SCSI ID
timing specifications, 26
troubleshooting, 6
U
uname -rs command, 1
Unload button, 9
unloading a tape cartridge, 16
Use Cleaning Tape LED, 9, 17
V
valid densities, 14
W
Write Protected LED, 9