Specifications

Modifyingthe

st.conf

File 23

Note – If multiple devices are enabled (lines uncommented) only the last

uncommented line with this format must end with a semicolon. All previous

lines with this format must end with a comma.

d. Using the editor, continue to scroll until you come to the end of the

“Configuration Values” section.

The line will look something like:

e. On the next line, add the following entry exactly as shown:

Note – All lines in this section end with semicolons.

f. Save and exit the file.

4. Go to Step 2 on page 1 and continue the installation procedure.

#WtQIC = 1,0x32,512,0x0624,1,0x00,0;

QDLT7 = 1,0x36,0,0x1D639,4,0x82,0x83,0x84,0x85,2;