Specifications

22 35-70GbyteSPARCstorageDLT7000 Tape DriveManual—February1997
A
Modifyingthest.conf File
Read this entire procedure before editing the st.conf file.
Note – The syntax is critical. Verify the placement of commas, semicolons, and
beginning and ending quotation marks.
1. Become superuser.
2. Make a copy of the original st.conf file as a backup (st.conf.old).
3. Edit the st.conf file.
Using an editor, scroll through the st.conf file to the following line:
a. Delete the # character that begins the line, if it hasn't already been
removed.
b. Using the editor, continue to scroll until you come to the end of the
“Tape Device Identifiers” section.
The line will look something like:
c. On the next line, add the following entry exactly as shown:
% su
Password:
#
#cp /kernel/drv/st.conf /kernel/drv/st.conf.old
#tape-config-list=
# "\076\000","Fujitsu 1/2\" Cartridge", "Fujitsu_half";
“SUN DLT7000”, “Quantum DLT 7000”, “QDLT7”;
5 spaces