Specifications

20 35-70GbyteSPARCstorageDLT7000 Tape DriveManual—February1997
A
Understandingthest.conf File
The beginning of the st.conf file contains possible values that you might use
to configure third-party or other unsupported tape drives. These values are
divided into three sections:
• tape-config-list
• Tape device identifiers
• Configuration values
tape-config-list
The line:
indicates the start of values that the operating system will use to configure
previously unsupported tape devices.
Note – There can only be one active (uncommented) tape-config-list=
line in the st.conf file.
TapeDeviceIdentifiers
The next section, which includes lines like:
and ends with a line like:
contains:
#tape-config-list=
# "ARCHIVE Python 28454","Archive Python 4mm Helical Scan","ARCH_Python",
# "ARCHIVE Python 29279", "Archive Python 4mm DAT Stacker","ARCH_Python",
# "\076\000", "Fujitsu 1/2\" Cartridge", "Fujitsu_half";
123