Specifications

19
Modifyingthest.confFile
A
The Solaris software environment recognizes all tape drives and autoloaders
that were supported by Sun when your operating system was released. If your
system uses SunOS releases 5.5 or 5.5.1, which were released before the
DLT7000 tape drive, you need to modify the /kernel/drv/st.conf file so
that your Solaris software will recognize the DLT7000 tape drive.
If you are familiar with this procedure, go to “Modifying the st.conf File” on
page 22. For more information on this procedure, go to “Understanding the
st.conf File” on page 20.