Specifications

Operation 13
2
LoadingaTapeCartridge
Figure 2-3 Loading a Tape Cartridge
To load a tape cartridge into the tape drive:
1. Make sure that the Operate Handle LED is on (Figure 2-1).
2. Lift the cartridge insert/release handle (Figure 2-3).
3. Insert the cartridge into the tape drive.
4. Push the handle closed.
Note – To prevent handle failures, do not flip the handle closed.
The Operate Handle LED turns off and the Tape In Use LED blinks to show the
tape is loading. When the tape is loaded, the Tape In Use LED turns on steady.
The tape is now ready for use.
2
4
3