Specifications

2 35-70GbyteSPARCstorageDLT7000 Tape DriveManual—February1997
1
5. Prepare your system or enclosure for servicing.
Follow the procedures in the service manual for your system or enclosure.
6. Install the tape drive.
Refer to the procedures in your system or enclosure service manual. Install
this drive as you would any full-height device.
a. Connect the SCSI and power cables to the connectors on the back of
the tape drive (Figure 1-1).
Figure 1-1 DLT7000 Tape Drive Cable Connectors
SCSI
connector
Power
connector