User's Manual

Device Application Notes For NetVault Revision A7
BakBone Software, Inc. 5 10/24/2003
 Drive Selection
9 Select the Drive Selection tab. Select Server/Client machine and open it to view the attached
tape drives.
9 Add Drive 1 by selecting the drive and verify the correct device is displayed in the Selected
Drives area on the right. (Figure 2.)
9 If there are more drives in the library, add the remaining drives, mapping them to each drive
bay. Ensure the Drive Bay number is correct before selecting.
9 Change the Library Name if desired or leave as default.
Figure 2. Drive Addition Within NetVault