User's Guide

Page 72 DDS-4 SCSI Interface Manual, Rev. B

Parameter Code Length Name

Minutes since last cleaning

08 3 Power on time (minutes)

09 3 Cylinder on time (minutes)

0A 2 Cleaning Cartridge count

0B 2 Reserved

0C 2 Reserved

0D 2 Reserved

0E 2 Reserved

0F 2 Reserved

10 2 Reserved

11 1 Reserved

12 1 Reserved

Completion Status

The Completion Status for the LOG SENSE command is shown in the following

table.

Code Message Description

00h Good Status

02h Check

Condition

Extended Sense Byte 02h:

Code Message Description

02h Not Ready No cartridge is inserted in the drive.

04h Hardware Error Parity error on SCSI bus or drive

hardware failure detected.

05h Illegal Request

• The CDB contains an invalid bit.

• The Page Code in the Log Page Header

specifies an unsupported log page.

• The parameter pointer is invalid.

06h Unit

• Cartridge was changed prior to accepting

Attention this command

• The drive was reset prior to this

command.