User's Guide

Page 144 DDS-4 SCSI Interface Manual, Rev. B
Bytes 16-17 Definition (vendor-unique SKSV codes)
B7 Loader, Load Magazine Failed
B8 Loader, Unload Magazine Failed
B9 Loader, Open Door Failed
BA Loader Close Door Failed
BB Loader, invalid element address
BC Loader, invalid initialization parameter
BD Loader, invalid message parameter
BE Loader, flash changer bit not set
BF Loader, cassette lost
C0 RTOS status task ID error
C1 RTOS status no memory available
C2 RTOS status mailbox in use
C3 RTOS status zero message
C4 RTOS status invalid system call
C5 RTOS status timeout
C6 RTOS status no message present
C7 RTOS status queue id error
C8 RTOS status queue full
C9 RTOS status partition id error
CA RTOS status invalid configuration parameter
CB RTOS status invalid input parameter
CC RTOS status task pending on queue
CD RTOS status event flag group and virtual timer id error
CE RTOS status event flag already set
CF RTOS status unknown error
D0 Hardware adjustment error
D1 Tape path error
D2 Unable to calibrate media
D3 Non-specific MCP error
D4 Command reject error
D5 Skip Device Area of media failed
D6 PG error
D8 High C1 errors during diagnostic
D9 Cassette load count too high for diagnostic use
DA EEPROM hardware error
DB EEPROM disabled
DC EEPROM not ready
DD EEPROM received unknown command
E0 Internal tape writer error
E1 Tape hit End of Data
E2 Tape hit EOT
E3 Tape hit BOT
E4 Tape lost position
E5 Tape position not found
E6 Tape volume overflow
E7 Tape write protected,
E8 Tape blank
E9 Tape, no cassette present
EA Tape write failure