User's Guide

Commands: Request Sense (03h) Page 143
Bytes 16-17 Definition (vendor-unique SKSV codes)
86 Invalid entity compression algorithm
87 Invalid entity record length field
88 Invalid entity record count field
89 Group buffer configuration error
8A Host buffer configuration error
8B Invalid ring buffer descriptor
8C Invalid BAT entry
8D Invalid BAT sequence found
8E Invalid cassette data format ID
8F Transfer skip BAT entry missing
90 Unrecoverable ECC error
91 Encountered a DCLZ error
92 Unknown status returned to DC task from low level function
93 DC Command reference queue error
94 Compression hardware error
95 DC space encounter file mark
96 DC space encounter set mark
97 DC space encounter end of partition
98 DC space encounter beginning of partition
99 DC space position lost
9A DC space internal error
9B DC invalid command state
9C DC dictionary SRAM failed
9D DC R/W pass through failed
9E DC R/W compression failed
9F DC detected group out of sequence
A0 Loader, No Magazine
A1 Loader, Invalid Source Address
A2 Loader, Invalid Destination Address
A3 Loader, Source Empty
A4 Loader, Destination Full
A5 Loader, Elevator Full
A6 Loader, Not Present
A7 Loader, Command Invalid
A8 Loader, DTE Initialize Timeout
A9 Loader, Busy
AA Loader, Insert cassette to drive failed
AB Loader, Insert magazine failed
AC Loader, Scan Failed
AD Loader, Diagnostic Failed
AE Loader, Extract cassette from drive failed
AF Loader, Extract cassette magazine failed
B0 Loader, Command Timeout
B1 Loader, General Failure
B2 Loader, Magazine Present
B3 Loader, Initialization Failed
B4 Loader, Raise Elevator Failed
B5 Loader, Lower Elevator Failed
B6 Loader, Rotate Magazine Failed