User's Guide

Page 140 DDS-4 SCSI Interface Manual, Rev. B
Byte 2
(Sense
Key)
Byte 12
(ASC)
Byte 13
(ASCQ)
Definition
(Additional sense code)
B Aborted Command
B 08 01 Logical unit communication time out
B 1B 00 Synchronous data transfer error
B 30 00 Invalid media
B 3D 00 Invalid bits in identify message
B 43 00 Message error
B 45 00 Select or reselect error
B 47 00 SCSI parity error
B 48 00 Initiator detected error message received
B 49 00 Invalid message error
B 4A 00 Command phase error
B 4B 00 Data phase error
B 4E 00 Overlapped commands attempted
B 53 00 Media load or eject failed
B 5A 01 Operator medium removal requested
D Volume Overflow
D 00 02 End of partition/medium detected
Vendor-Specific Code Qualifiers
The following table lists the vendor-unique SKSV codes referenced in the table
above.
Bytes 16-17 Definition (vendor-unique SKSV codes)
05 Unexpected PC in Log Select
06 Invalid log parameter
07 Invalid log page
08 Invalid Tape Alert
09 Negative Tape Alert report count
0A Unexpected Tape Alert MRIE
0B Invalid log exception
0C Invalid CDB length
0D Log page 3C response failed
0E Invalid EEPROM alert
0F Invalid EEPROM response
10 SCSI Diagnostic initialization failed
11 Diagnostic SBIST failed
12 Diagnostic BBIST failed
13 Diagnostic DBIST failed
14 Diagnostic DMA setup failed
15 Diagnostic host interface RAM failed
16 Diagnostic AIC RAM failed
17 Diagnostic DMA write interrupt failed
18 Diagnostic DMA write FIFO overrun
19 Diagnostic DMA write offset error
1A Diagnostic DMA write host interface parity error