User's Guide

Page 118 DDS-4 SCSI Interface Manual, Rev. B
Completion Status
The Completion Status for the READ ELEMENT STATUS command is shown in the
following table.
Code Message Description
00h Good
Status
• The drive is ready for another command.
• All the status data has been sent.
02h Check
Condition
Extended Sense Byte 02h:
Code Message Description
04h Hardware Error Drive hardware failure detected.
05h Illegal Request
• The CDB contains an invalid bit or an
invalid element address.
06h Unit
• Cartridge was changed prior to accepting
Attention this command
• The drive was reset prior to this command.