User's Guide

Commands: Move Medium (A5h) Page 103
Completion Status
The Completion Status for the MOVE MEDIUM command is shown in the following
table.
Code Message Description
00h Good Status • The drive is ready for another command.
• The cartridge has been moved to the specified location. If the cartridge
was moved to the drive, it is positioned at BOT.
02h Check
Condition
Extended Sense Byte 02h:
Code Message Description
02h Not Ready No magazine present.
04h Hardware Error Drive hardware failure detected.
05h Illegal Request -Source element is empty or
destination is full.
-Address specified is not assigned
to a specific element.
-The drive is not the source or
destination.
06h Unit -Cartridge was changed prior to
Attention accepting this command.
-The drive was reset prior to this
command.