User's Guide

Page 100 DDS-4 SCSI Interface Manual, Rev. B
Element Address Assignment Page (Autoloader Only—1Dh)
The data in the Element Address Assignment page informs the host of which type of
elements and how many elements of each type are supported by the current
configuration of the Autoloader (as defined in the EXCHANGE MEDIUM COMMAND
drive). The following table shows the layout of this page.
Byte
Bits
7 6 5 4 3 2 1 0
0 Page Code (1Dh)
1 0 0 0 1 0 0 1 0
2 0 0 0 0 0 0 0 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 1
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 1 0
8 0 0 0 0 0 0 0 0
9 Number of Slots in the Magazine
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
13 0 0 0 0 0 0 0 0
14 0 0 0 0 0 0 0 0
15 0 0 0 0 0 0 0 1
16 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 1
18 0 0 0 0 0 0 0 0
19 0 0 0 0 0 0 0 0
The MODE SENSE parameter list header is different for LUN 0 and LUN 1. For
LUN1, bytes 1 and 2 are always zero. Also, the MODE SENSE parameter list block
descriptor is different for LUN 0 and LUN 1. For LUN 1, bytes 0, 5, 6, and 7 are
always zero.
Device Capabilities Page (Autoloader Only—1Fh)
The following table shows the layout of this page.
Byte
Bits
7 6 5 4 3 2 1 0
0 Page Code (1Fh)
1 0 0 0 1 0 0 1 0
2 0 0 0 0 1 0 1 0
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 1 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 1 0
8 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0