Specifications

Quantum|ATL StackLink™ Installation Instructions
Document 6421009-04, Ver. 4, Rel. 0
February 2002
28 Completing the Installation
5 Press the Up or Down buttons to select Demo 5.
6 Press Select.
The Demo 5 program starts. The program moves the data cartridge
randomly between levels until you stop the program. It is
recommended that you allow the program to run for five times the
number of levels in the library; for example, a ten level stack
should be run for at least 50 cycles.
7 Ensure that all levels are accessed by observing the cartridges
moving from level to level. If not, re-check the interlibrary cabling.
8 When the program has run successfully for the recommended
number of cycles, press
Stop to end the program.
The GUI stops when the current cycle is completed.
The StackLink installation is now complete.