Specifications

Quantum|ATL StackLink™ Installation Instructions
Document 6421009-04, Ver. 4, Rel. 0
February 2002
24 Completing the Installation
Completing the Installation 0
To complete the StackLink installation:
• Power up the library
• Configure the library
• Test the library robotics
Powering Up the
Library
0
To power up the library, press the power switch on the back panel of
the library (see figure 19
).
Figure 19 Power Switch
The GUI displays a welcome screen (see figure 20) and the library runs
a power-on self-test (POST).
Caution: To minimize the effects of inrush current, always turn on
the library using this library power switch instead of
using the power switch that may be on the AC
distribution unit.
Power switch