Specifications
Quantum|ATL StackLink™ Installation Instructions
Document 6421009-04, Ver. 4, Rel. 0
February 2002
Cabling the Library 23
2 Connect the power cable (provided in the library accessories kit) to 
the power inlet on the back of the library (see figure 18
) and to the 
AC distribution unit.
Figure 18 Power Inlet
6-9 Select one of the following options:
• Connect no more than 5 libraries to each of 
two AC distribution units rated minimum 
10A, minimum 1.00mm
2
 <HAR> cord with 
minimum 10A plug. Must be 3 wire 
grounding plug and wall outlet. The AC 
distribution units must be plugged into 
separate outlets served by separate circuit 
breakers or fuses.
• Connect all libraries to one AC distribution 
unit rated minimum 10A, minimum 
1.00mm
2
 <HAR> 3 wire cord with 3 wire 
IEC60309 rated 16A. Must be 3 wire 
grounding plug and wall outlet and have a 
ground warning label.
• Connect all libraries to one AC distribution 
unit rated minimum 10A, minimum 1.00 
mm
2
 <HAR> 3 wire cord permanently 
wired to the electrical supply. Must be 
connected with a 3 wire cable and have a 
ground warning label.
Select one of the following options:
• Connect no more than 5 libraries to each of 
two AC distribution units rated 15A or 
20A, with a minimum 14AWG 3 wire cord, 
and a 15A or 20A plug. Must be 3 wire 
grounding plug and wall outlet. The AC 
distribution units must be plugged into 
separate outlets served by separate circuit 
breakers or fuses.
• Connect all libraries to one AC distribution 
unit rated 20A, with a minimum 14AWG 3 
wire cord, with a 20A plug. Must be 3 wire 
grounding plug and wall outlet.
• Connect all libraries to one AC distribution 
unit rated minimum 20A, with a minimum 
14AWG  3 wire cord, permanently wired to 
the electrical supply.
10 Same requirements as 6-9 above. Same requirements as 6-9 above, but the AC 
power distribution unit must also have a 
ground warning label.
# of 
Library 
Modules
Distribution Unit Requirements
200-240V 50-60Hz supply voltage (Europe 
& international, etc.)
100-120V 50-60Hz supply voltage (USA, 
Canada, Japan, etc.)
Power inlet










