Specifications

Quantum|ATL StackLink™ Installation Instructions
Document 6421009-04, Ver. 4, Rel. 0
February 2002
12 Installing the Motor Assembly
6 Connect the end of the umbilical cable to the socket on the carriage
connection board (see figure 8
).
Figure 8 Connecting the
Umbilical Cable to the
Bottom of the Carriage
Installing the Motor Assembly 0
To secure the motor assembly to the vertical shuttle assembly:
1 Insert the bottom of the motor assembly into the top of the vertical
shuttle assembly, aligning the three holes in the vertical shuttle
assembly with those on the motor assembly (see figure 9
).
Screw
Umbilical cable
Pin
Carriage
Umbilical chain
Umbilical cable