User's Guide

6-4 Processing media

DOC D00 025-A

6.2.1 Inserting cartridges

New cartridges are inserted in the AML/J through the I/O unit.

Step 1 Press the button on the I/O unit

The button on the I/O unit lights up green and the I/O unit is

unlocked

Step 2 Open the door of the I/O unit

Step 3 Empty the problem box places if cartridges are there

Step 4 Insert the cartridges in the I/O unit. Pay attention to the correct

position.

• Tape head down

• Label to the front

Step 5 Close the door of the I/O unit

The AML/J locks the I/O unit .

According to configuration, the robot checks the magazine (barcode or

empty place) on the cartridges.

Step 6 Move the cartridge with the aid of the host software into the