User's Guide

Operating The AML/E System
599 DOC C00 003 Operator Guide page 5 - 5
5.2.2 Starting the Operating Console AMU
Information
Do this only when the operating console AMU is not shown on the monitor or
has been quit unintentionally.
a) Press <CTRL> + <ESC> (process list).
b) Check whether AMU and KRN have already been started.
c) If both processes have been started change to the AMU (select the process and
confirm by pressing <ENTER>).
d) If one of the two processes has not yet been started perform a system shut-down
( page 5/27) and then press <Ctrl> + <Alt> + <Del>.