Release Notes

For Your Safety 1
AMU
Version 3.12 AMU Release Notes
This release notes cover the release of the AML Management Software (AMU) Version 3.12. For
more information, call the ADIC Technical Assistance Center at:
• 1.800.827.3822 (outside of Europe and Japan)
• 00.800.9999.3822 (Europe and Japan)
For Your Safety
Requirements
The CD-ROM of this AMU version is a complete version, which does not require a previous version
of AMU software. AMU 3.12 can replace all previous installed AMU versions.
The following software releases are required:
Other host application software version prerequisites do not apply.
WARNING:
AMU SENDS TIME CONTROLLED COMMANDS TO ITS ROBOTS.
WHEN STARTING AMU, MAKE SURE THAT NO PERSON, NO ARMS
OR HANDS, ARE PLACED INSIDE THE STORAGE DEVICE. THE AMU
SENDS COMMANDS INDEPENDENT OFTHE HOST SOFTWARE
RUNNING ON THE SYSTEM.
Software Version DCI Requirements
AML/2 control unit 2.20D or higher Standard gripper
2.30D or higher Parallel gripper
AML/E control unit 2.20D or higher Standard gripper
2.30C or higher Parallel gripper
AML/J control unit 2.40D or higher
DAS 3.12 or higher UNIX, OS/2
ROBAR V2.5 or higher V3.02 recommended
HACC/OS400 V2.2 or higher
HACC/MVS 3.0 PTF ZY30015 older version does not support the DUAL- and
CLEAN function
TwinATL S0308D20 or higher