Operator's Guide

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
ACL 4/52 Operator’s Guide 35
5With
Retries
displayed on line #2 of the SDA, press the
SELECT
button and verify the following is displayed in the SDA:
Note:
Retries Enabled is the default. If you want to disable this feature,
proceed to step 6. Otherwise, exit the menu mode.
6 Use the
↓
button to bypass the
Enabled
option and verify the
following is displayed in the SDA:
7 With the desired option displayed on line #2, press the
SELECT
button.
8 Exit the menu mode.
Enabling/Disabling the
Auto Load Feature
2
To enable or disable the auto load feature:
1 Enter the menu mode.
2 Press the
SELECT
button to choose the
Configuration
menu.
3 Verify the following is displayed in the SDA:
4 Use the
↓
button to bypass the
Inquiry, SCSI Address
,
Power-Up
State
, Number of Drives,
Auto Clean,
and
Retries
menus and
verify the following is displayed in the SDA:
5With
Auto Load
displayed on line #2 of the SDA, press the
SELECT
button and verify the following is displayed in the SDA:
Note:
Auto Load Disabled is the default. If you want to enable this feature,
proceed to step 6. Otherwise, exit the menu mode.
Menu: Retries
Enabled<
Menu: Retries
Disabled
Menu: Configurati
Inquiry
Menu: Configurati
Auto Load
Menu: Auto Load
Disabled<