Operator's Guide

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
34 ACL 4/52 Operator’s Guide
Enabling/Disabling the
Auto Clean Option
2
To enable or disable the auto clean option:
1 Enter the menu mode.
2 Press the
SELECT
button to choose the
Configuration
menu and
verify the following is displayed in the SDA:
3 Use the
↓
button to bypass the
Inquiry
,
SCSI Address
and
Power-
Up State
menus and verify the following is displayed in the SDA:
4With
Auto Clean
displayed on line #2 of the SDA, press the
SELECT
button and verify the following is displayed in the SDA:
Note:
Auto Clean Disabled is the default. If you want to enable the automatic
cleaning, proceed to step 6. Otherwise, exit the menu mode.
5 With the desired option displayed on line #2, press the
SELECT
button.
6 Exit the menu mode.
Enabling/Disabling the
Retry Option
2
To enable or disable the retry option:
1 Enter the menu mode.
2 Press the
SELECT
button to choose the
Configuration
menu.
3 Verify the following is displayed in the SDA:
4 Use the
↓
button to bypass the
Inquiry
,
SCSI Address
,
Power-Up
State
and the
Auto Clean
menus and verify the following is
displayed in the SDA:
Menu: Configurati
Inquiry
Menu: Configurati
Auto Clean
Menu: Auto Clean
Enabled
Menu: Configurati
Inquiry
Menu: Configurati
Retries