Operator's Guide

Chapter 1 Library Overview
Operator Accessible Components
ACL 4/52 Operator’s Guide 7
Figure 4 Load Port
Front Door (with
Interlock Switch)
1
The library door is shown in figure 5. This door can be used to access
the DLT tape drive status/control panels for manually unloading,
ejecting and removing a tape cartridge from the drives.
For safety purposes, an interlock switch (shown in Figure 4) removes
power from the robotics equipment when the door is opened.
Typically, the front door will be used by FSEs during maintenance
procedures.
Load Port (Closed)
Cartridge
(View Port)
TA00015B
(Closes to Left)
Load Port (Open)