User`s guide

Chap.1

Setting

1. Choice of a location

The Quantum printer must be set up on a strong, flat surface, capable of suppor-

ting the whole weight of the printer and its loaded supports (cards and ribbon).

The printer must be accessible from all sides for installation and use.

WARNING !

The printer weighs 25 kg (55lbs) without the consumables installed. It is there-

fore wise to be helped by another person when lifting and moving it.

2. Unpacking the printer

To unpack the printer, proceed as follows :

1. Remove the upper protective foams.

2. With another person, lift the printer out of its cardboard and place it in the

selected location.

3. Remove any adhesive from the outside of the printer.

NOTE !

It is best to keep all the packing materials in case the printer has to be moved or

returned for any reason.

The following elements are provided with your Quantum printer :

■ Two weights

■ One supply and one supply cable

■ One printer interface cable

■ One user’s guide (this guide)

■ A Quantum CD (Drivers & Documents)

■ A cleaning kit

If any of these elements are missing from your set, please contact your Evolis reseller.