User`s guide

Annexe B
Smart Card Contact
Station
Introduction
The Quantum printers with a Smart Card Contact Station are called Quantum
Smart printers. The working mode of a Quantum Smart printer is identical to that
of a Quantum printer.
The Smart Card Contact Station of the Quantum Smart enables the chips to be
programmed according to ISO 7816-2 standards.
1. Location of the contact station
The Contact Station is a module installed in factory on
Quantum Smart printers.
The Contact Station is placed over the route of the cards and
after the print head. To come into contact with the station,
the chip card is placed under it and is pushed up mechani-
cally.
NOTE !
The programming sequence of a chip is still carried out before the card is printed.
IMPORTANT !
Only use chip cards in line with the ISO 7816-2 standard.
Never print on the chip.
47