User`s guide

4. Close the printer cover. The printer head is now installed.
Stage 3
Parameterising the new printer head
1. Make sure that the printer is turned on (position 1) and connected to a com-
puter on which the printing driver of the Quantum printer is installed.
2. In the properties of the printing driver, click on the “Tools” dialog box.
3. In the section “Dialog with printer” enter the following : Pkn;x
x = the print head kit number written on a transparent label on the print head
Example : if the print head kit number is: 179-004-00048, the following com-
mand must be entered : Pkn;179-004-00048
WARNING !
If the print head kit number has not been correctly entered, the printer may not
work properly.
The new print head has now been parameterised. You can reuse your Quantum
printer.
6. Customer assistance
The suggestions given before in this section do not enable all problems to be resol-
ved, connect to the evolis.com site for further information or contact your Evolis
reseller.
Evolis Internet site
www.evolis.com
If you need extra technical help, you will find a lot of information concerning the
use and repair of the Evolis printers in Support & Services on the Evolis internet site.
This enables you to load the latest versions of the Firmware, the drivers and the
user manuals, videos of use and cleaning of Evolis printers and an FAQ section.
36