User`s guide

In the slip over module :

Remove the card as follows :

1. Turn off the printer (position 0)

2. Unscrew the screw and remove the two seals as indicated opposite

3. Remove the card from the flip over by

turning the flip if necessary.

4. Refit the two seals.

5. Turn on the printer once more (posi-

tion 1).

To prevent card jamming :

1. Make sure that the thickness of the

card used corresponds to the speci-

fications in the section "Technical

Specifications " of this manual.

2. Make sure that the cards are not

swollen.

3. Make sure that the cards are not stuck together.

5. Changing a print head

The print head of a printer is changed easily and effectively without any need for

tools or any special adjustment.

WARNING !

Before changing a print head, make sure that the printer has been turned off

(position 0).

Stage 1

Removal of the faulty print head