User`s guide

OUTPUT HOPPER/S FULL

CLEANING

(AFTER 1000

INSERTIONS)

CLEANING

(AFTER 1500

INSERTIONS)

PRINTER INTERNAL

PROBLEM

(MECHANICAL)

COVER OPEN

OUTPUT HOPPER/S

DOOR OPEN

output hoppers is/are full

Empty the hopper/s and then press the push but-

ton for one second. The printing starts again.

■ The printer needs cleaning

See chapter 3 “Cleaning “

■ The printer needs cleaning

See chapter 3 “Cleaning “

■

There is jamming on the card in the printing

post or in the flip over module

See point 4 of this section

■

A mechanical part is faulty in the printer.

Press the push button for one second. If the pro-

blem persists, call your Evolis reseller for assistan-

ce.

■ The printer cover is open

Close the cover. The activity in course restarts.

■ One or some of the door/s of the output

hopper/s is/are open.

When a door of the hopper/s is open, the printer

continues the printing in course and the card is

then stocked under the destination hopper. Close

the door/s of the hopper and the activity restarts.

Status of the LED’s Interpretation Solution or explanation