User`s guide

2. Cleaning of the print head

Cleaning cycle : each time you load a new ribbon

Use : cleaning swabs

The cleaning head is cleaned when cleaning the interior of the printer (see prece-

ding section). However, in order to preserve the original printing quality and redu-

ce the incidents caused by an excessive presence of ink on the surface of the print

head, it is recommended that you clean it regularly (every 1000 cards) using the

cleaning swabs provided with the UltraClean cleaning set.

ATTENTION !

It is very important to protect the print head and all other associated com-

ponents from any electrostatic discharge.

The print head is a fragile element. To avoid damaging it :

■ Before cleaning the print head, disconnect the printer from the mains.

■ Respect the cleaning cycles

■ Never place the print head in contact with sharp of metal object.

■ Avoid direct contact of the surface of the print head with fingers.

Changed pint quality or even permanent degradation of the print

head could result.

To clean the print head, proceed as follows :

1. Open the cover of the printer and

locate the print head.

2. Take a new swab and

press on the stick to

let the liquid out.