User`s guide

If the printer has not been cleaned after the Cleaning light has lit, it will begin to

flash when 450 supplementary cards have been inserted. In this case, the warning

light flashes as follows :

Status after inserting 2250 cards

WARNING !

If the cleaning cycle is not performed before the 2250

card is printed, the print

head warranty is void.

This simple cleaning system requires the use of pre-saturated cleaning cards spe-

cially conceived for the printer. A cleaning kit including card samples is delivered

with your package. The repeated passes of the card inside the printer clean the

card transport rollers, the cleaning rollers and the print head.

To clean the interior of the printer, proceed as follows :

1. Remove the ribbon from the printer then close the

cover.

2. Remove all the cards from

feeder 1.