User`s guide

2. Ensure that the stack of cards is
correctly aligned on the edge of
the feeder.
3. Place the weight provided with the
printer on the cards as shown.
4. If necessary, insert a maximum 500 cards (0.76 mm – 30 thou.) in feeder 2,
repeating the operations noted in points 1, 2 and 3
5. Ensure that the doors to feeders 1 and 2 are completely closed.
IMPORTANT !
Card thickness : The Quantum printer only accepts cards with a thickness of
0.76 mm (30 mil).
Advice concerning the selection of cards :
• Only use the type of cards appearing on the Technical Specifiactions
chapter of this manual
• Do not touch the printable surface of the cards ; the printing quality
depends on this
• Do not use damaged or folded cards or with a texture in relief
• Always stock blank cards in a clean, dust-free loaction
11