User`s guide

• Output Hopper 1

Hopper 1 receives the cards from the feeder pre-defined in the feeder confi-

guration in the driver.

• Output Hopper 2

Hopper 2 receives the cards from the feeder pre-defined in the feeder configura-

tion in the driver.

b. ) Loading the cards

The Quantum printer has two feeders that can contain a maximum 500 cards

each (0.76 mm – 30 mil.).

A label placed inside each feeder

enables them to be identified :

Feeder 1 and Feeder 2.

NOTE !

The configuration of the feeders may be set from the properties of the prin-

ting driver. See point 2 of chapter 2 of this manual for further information on

their use.

1. Open the door of the feeder as

indicated and insert 500 cards max.

(0.76 mm – 30 thou.). Note the posi-

tion of the pre-printed cards.