Operator's Guide

Chapter 2 Operating the Library
Using the Control Panel Menus
Quantum|ATL 7100 Series Library Operator’s Guide 45
To configure 4/52 Identity Mode:
1 Enter the menu mode.
2 Press the SELECT button to choose the Configuration menu.
3 Verify the following is displayed in the SDA:
4 Press the ↓ button until 4/52 Identity is displayed in the SDA:
5 Press the SELECT button to select 4/52 Identity and verify the
following is displayed in the SDA:
6 Use the ↑ and ↓ buttons to display the desired option
(Enabled, Disabled, or Exit Menu).
7 With the desired setting displayed on line 2, press the SELECT
button.
8 Exit the menu mode.
Menu:Configurati
Inquiry
Menu:Configurati
4/52 Identity..
Menu:4/52 Identi
Enabled