Operator's Guide

Chapter 2 Operating the Library

Using the Control Panel Menus

38 Quantum|ATL 7100 Series Library Operator’s Guide

To change the SDA language:

1 Enter the menu mode.

2 Press the SELECT button to choose the Configuration menu.

3 Verify the following is displayed in the SDA:

4 Use the ↓ button to bypass the Inquiry, SCSI Address, Power-

Up State, Auto Clean, Retries and Auto Load sub-menus and

verify the following is displayed in the SDA:

5 With Language displayed on line 2 of the SDA, press the

SELECT button and verify the following is displayed in the

SDA:

6 Use the ↑ and ↓ buttons to navigate to the desired language.

7 With the desired language displayed on line 2, press the

SELECT button.

8 Exit the menu mode.

Adjusting the

Status Display

Area Contrast

To adjust the status display area contrast:

1 Enter the menu mode.

2 Press the SELECT button to choose the Configuration menu.

3 Verify the following is displayed in the SDA:

Menu:Configurati

Inquiry

Menu:Configurati

Language

Menu:Language

English

Menu:Configurati

Inquiry