Operator's Guide

Chapter 1 Introduction
Operator Accessible Components
Quantum|ATL 7100 Series Library Operator’s Guide 11
Storage Array
Door
1
The storage array door is used for bulk loading and unloading of
cartridges (see figure 7
). For safety purposes, an interlock switch
removes power from the robotics equipment when the door is
opened.
Always press the STANDBY button to open any library door. The
FAULT indicator flashes until the current command is completed.
Wait until the
STANDBY indicator is on solid and System Off-line is
displayed before opening the door.
Figure 7 Storage
Array Door
Storage array door