Installation Guide

Quantum 1U Rackmount Rail Installation Guide
Document 81-81209-05 A01
January 2006
4
Step 1: Installing the Chassis Sections onto the
1U Rackmount
0
There are two chassis sections, one for each side of the 1U Rackmount chassis.
1 Pull the chassis section of the rail forward, past the mounting flange on
the front of the rail set (see figure 1
).
The intermediate section and the chassis section will lock in place when
fully extended.
2 Press the release button to release the intermediate section and slide out
the chassis section (see figure 1
).
Figure 1 Pressing the
Release Button
3 Attach one chassis section to each side of the 1U Rackmount chassis using
four screws per side (see figure 2
).
Figure 2 Attaching the
Chassis Section to the
1U Rackmount Chassis
Release button
Chassis
Intermediate
Stationary
section
section
section
Screws
Front