Quick Setup Guide

Access Point Quick Set Up Guide
www.qntmnet.com
Step 1- Access Point Initial Configuration
• Provide internet access to WAN port of the Access Point.
• Access point default SSID QN_XX: XX will broadcast. (Where XX: XX are last four digits of
Access Point MAC Address).
• Connect QN_XX: XX SSID and browse access point default IP 169.254.1.1. Below screen
appears.
Figure 1
• Click on Start Configuration (Figure1).
• Do IPv4 setup by selecting required option DHCP, Static or PPPoE and click on Next.
(Figure2).
• On successful IP setup, Management Mode setup screen would (Figure3) appear. Set user
name and password of your choice.
Figure 2 Figure 3