Quick Setup Guide

Access Point Quick Set Up Guide
www.qntmnet.com
This Quick Setup Guide provides step-by-step instructions on how to set up Quantum Networks Access
Point. After completing the steps described in this Guide, you will be able to install the Access Point
(AP) on site and provide wireless network access to users.
Before You Begin
Your Quantum Networks Access Point can be managed by “Quantum Networks Cloud Controller” or
can work in “Standalone” Mode.
To manage Access Point from cloud controller, please follow step 4 first then step 1 ahead. For
Standalone mode, continue with step 1 ahead.
Package Contents
• Quantum Networks Access Point
• Access Point Quick Setup Guide
Set up Requirements
• A Desktop / Laptop / Mobile client.
• Ethernet cable.
• Internet connectivity.
• AC adapter (Purchase separately) or 802.3af / 802.3at compliant PoE switch (power over
ethernet) or PoE injector.
Connect AP
• After unpacking AP from package, connect it to Internet source.
• Plug in ethernet cable to WAN port of AP.
• Power on AP by connecting AC adopter or 802.3af / 802.3at compliant PoE switch.
Note : Access point must have internet access during initial setup for the first time for activation of the device,
warranty and support.