Quick Setup Guide

Before You Begin
Your Quantum Networks’ Access Point can work in “Standalone Mode” or can be
managed by “Cloud Controller”.
To manage Access Point by “Cloud Controller”, please follow step 5 first and then step 1.
For “Standalone Mode”, continue with step 1.
Package Contents
• Access Point
• Quick Setup Guide
Prerequisites
 Internet access
 Desktop / Laptop / Handheld device
 802.3af / 802.3at PoE Switch / PoE Injector
Connect Access Point
 After unpacking Access Point, connect it to internet source
 Plug in Ethernet cable of Access Point
 Power on Access Point by using 802.3af / 802.3at PoE Switch / PoE Injector
Note: Access Point must have internet access during initial setup for the first time to activate
the device, warranty and support.