Quick Setup Guide

This Quick Setup Guide provides step-by-step instructions on how to set up Quantum Networks
TM
Access Point. After completing the steps described in this Guide, you will be able to install the
Access Point (AP) on site and provide wireless network access to users.
Before You Begin
Your Quantum Networks
TM
Access Point can be managed by “QUANTUM RUDDER “ (Quantum
Networks
TM
Cloud Controller) or can work in “Standalone” Mode.
To manage Access Point from “QUANTUM RUDDER”, please follow step 4 first then step 1 ahead.
For Standalone mode, continue with step 1 ahead.
Package Contents
• Quantum Networks
TM
Access Point
• Access Point Quick Setup Guide
• Mounting Bracket
• Screws Set
Set up Requirements
 A Desktop / Laptop / Mobile device.
 Ethernet cable.
 Internet connectivity.
 AC adapter (Purchase separately) or 802.3af / 802.3at compliant PoE switch (power over
ethernet) or PoE injector.
Connect AP
 After unpacking AP from package, connect it to Internet source.
 Plug in Ethernet cable to WAN port of AP.
 Power on AP by connecting AC adopter or 802.3af / 802.3at compliant PoE switch.
Note : Access point must have internet access during initial setup for the first time for activation of
the device, warranty and support.