User Instructions

3. Advanced Features Summary
The chart below summarizes the advanced features for various Qflash series. A “U” means the
Qflash model will have this feature when upgraded to series 5d-R. An “F” means this feature is
available in the model shown. An “N” means the feature is not available. Visit qtm.com for
upgrade procedures and costs.
Feature Qflash Models
QF4d QF5d QF5d-R Trio
Wireless Control in Nikon/Canon U U F N
systems with Qnexus
Wireless multiple ratio TTL U U F F
(QF5d-R requires Dw-R Adapters & FreeXWire)
Wireless preflash TTL with digital cameras U U F F
(QFlash requires Dw/ Dw-R Adapters and FreeXWire)
Wireless remote Auto / Auto Fill mode U F F F
Zone control of FW7Q from panel of Qflash U F F N
Flash ready indication in camera viewfinder F F F F
Shutter speed control (camera detects flash F F F F
and sets shutter)
Rear Curtain Sync F F F F
High speed sync N N N F
Auto focus assist F F F F
Auto Fill ratio F F F F
4. Getting Started
4.1 Restoring Factory settings
You can restore the factory settings by the following method:
1. Turn Turbo OFF, connect Trio to Turbo.
2. Press and hold any button
3. Turn Turbo ON.
4. The Qflash will display a reset message and some soft key options
RESET ALL - will restore all the factory settings.
KEEP P1 P8 - will keep your stored Program modes, but reset everything else to factory
settings.
EXIT – will exit the reset menu without changes
4.1 Inserting the Flash Tube
Match the red dot on the base of the flash tube with the red dot in the socket of Qflash. Push
the flash tube in until it is seated snugly into the socket. Excessive force is not required.
Page 4
Page 25