User Instructions

18. Program Mode Operation
The Program mode allows you to store your favorite settings and set-ups and then quickly recall
them just by pressing the soft keys. You can program up to 8 Qflash set-ups of Manual, Auto,
or TTL operation, including settings for all parameters.
18.1 Saving a set up
When you find a set up you like and want to store it, press the SAVE soft key. The display will
prompt you to determine the program number (P number ) that you want to save the set up as.
Use the Left and right arrows to adjust the P number up or down. Once you’ve selected the P
number you want to store the set up as, then press the save soft key. If you wish to not save
the set up, then press the exit soft key.
18.2 Using the program mode.
To enter the program mode, press the MODE button, then press the PRGM MODE soft key,
then press the MODE button again.
The current program number will be displayed
along with the mode and the settings for that
program.
The soft keys allow you to change to a different
program number quickly.
You can change the function of the soft keys by
pressing the Left and right arrows when nothing
is highlighted.
The available soft key functions depend on the mode of the program.
Any changes made to the settings of any program are saved to that program automatically.
There is no need to take any action to save the changes.
To exit the program press the MODE button, then use the left  and right  arrows to select
a new mode, then press the MODE button again.
Page 24
MO D
E
/OK
SET
P1-P2
P3-P4
P5-P6
P7-P8
P1 QTTL
F 5.6
7
FILL +0
ISO 200